PX949-IP-TH_01_1024.png
PX949-IP-TH_01_1024.png

PX949-IP-TH - Splitter DMX-RDM IP TH

$513.84
A splitter, a DMX signal distributor, allows for the creation of branches in extensive DMX installations. Connecting a large number of receivers in series can be troublesome, which is why the possibility of creating branches of the DMX track using a splitter was created. With the PX949-IP-TH you can split the input DMX signal into 4 independent branches. The individual output lines are galvanically separated from both the input and from each other. The splitter can operate in three modes: filtering – incoming RDM packets are discarded and the output DMX signal is completely regenerated with the following parameters: Break – 320μs, MAB – 30μs, MBF – 10μs, WAIT – 200μs, the number of sent channels is 24 – 512 depending on the number of input channels – PX949-IP-TH recognizes how many DMX channels are received, bypass – the output signal is exactly the same as the input signal – RDM is not supported, normal – the splitter allows for bidirectional transmission of RDM packets. The DMX-RDM IP TH splitter is manufactured in an IP65 housing adapted for mounting on standard 35mm DIN rails.
A splitter, a DMX signal distributor, allows for the creation of branches in extensive DMX installations. Connecting a large number of receivers in series can be troublesome, which is why the possibility of creating branches of the DMX track using a splitter was created. With the PX949-IP-TH you can split the input DMX signal into 4 independent branches. The individual output lines are galvanically separated from both the input and from each other. The splitter can operate in three modes: filtering – incoming RDM packets are discarded and the output DMX signal is completely regenerated with the following parameters: Break – 320μs, MAB – 30μs, MBF – 10μs, WAIT – 200μs, the number of sent channels is 24 – 512 depending on the number of input channels – PX949-IP-TH recognizes how many DMX channels are received, bypass – the output signal is exactly the same as the input signal – RDM is not supported, normal – the splitter allows for bidirectional transmission of RDM packets. The DMX-RDM IP TH splitter is manufactured in an IP65 housing adapted for mounting on standard 35mm DIN rails.