PX787_04_1024.png
PX787_04_1024.png

PX787 - DMX / DALI Interface 1x

$448.11
PX787 is a DMX-512 control signal converter for DALI protocol. DMX / DALI 1ch is an advanced converter that allows to combine lighting installations based on the DALI protocol with DMX-512 control system. Using the PX787, you can connect devices working in the DALI protocol to the controller sending the DMX-512 signal. The device is equipped with two DMX (in / out) ports and one DALI port which allows to connect up to 64 devices – in accordance with the DALI standard. The converter also supports four digital inputs, from which you can set such actions as: turn on / off, set the scene or set the brightness.* Managing PX787 settings is possible by means of buttons and screen or by means of a built-in Web Server. Changing the settings includes: searching for DALI devices change of ballast parameters (e.g.: brightness, address, “fade time”, “fade rate”, etc.) change of converter network settings firmware upgrade DMX / DALI 1ch has been placed in a housing adapted for mounting on a 35mm DIN rail and is supplied with 12 – 24V DC safe voltage. Please note that the DALI line must have external power supply. * - support for external keys is available from serial number 21030041 The power supply / DALI / DMX connector system has changed from the serial number 22020242. Note! Please read the upgrade instructions before upgrading to 2.0.0.
PX787 is a DMX-512 control signal converter for DALI protocol. DMX / DALI 1ch is an advanced converter that allows to combine lighting installations based on the DALI protocol with DMX-512 control system. Using the PX787, you can connect devices working in the DALI protocol to the controller sending the DMX-512 signal. The device is equipped with two DMX (in / out) ports and one DALI port which allows to connect up to 64 devices – in accordance with the DALI standard. The converter also supports four digital inputs, from which you can set such actions as: turn on / off, set the scene or set the brightness.* Managing PX787 settings is possible by means of buttons and screen or by means of a built-in Web Server. Changing the settings includes: searching for DALI devices change of ballast parameters (e.g.: brightness, address, “fade time”, “fade rate”, etc.) change of converter network settings firmware upgrade DMX / DALI 1ch has been placed in a housing adapted for mounting on a 35mm DIN rail and is supplied with 12 – 24V DC safe voltage. Please note that the DALI line must have external power supply. * - support for external keys is available from serial number 21030041 The power supply / DALI / DMX connector system has changed from the serial number 22020242. Note! Please read the upgrade instructions before upgrading to 2.0.0.